Phoenix

PHOENIX DE (double-end), is the greatest technological expression ever reached in the bottle washing sector.
This project of washer bottle, directed to important users, has been projected, experimented and realized to satisfy the most specific demands of whom highly uses these machine in professional way.
Peculiarity of this machine double-end is the high hygiene (thanks to the separated loading and unloading bottles) and ease of cleaning and maintenance.
The most significant characteristics of this model are:
  • the modular construction to facilitate the transport and for possible future implementations;
  • possibility to have from 2 to 5-6 detergent baths;
  • possibility to have a special loading module with pre-heating bath;
  • possibility to have a special rinse module, with acid bath or traditional rinsing bath.

Sophisticated and reliable control systems allow remotely manage the entire washing cycle, as well as control of the operations, speed and consumption.

Range production: 10.000-50.000 bott/h.

  • PHOENIX 20DR – 10.000-30.000 bott/h.
  • PHOENIX 30DR – 15.000-40.000 bott/h.
  • PHOENIX 40DR – 20.000-50.000 bott/h.

photos

MAIN TECHNICAL FEATURES​

  • The machine is in compliance with Machine Directive 2006/42/CE.
  • High speed loving and unloading systems.
  • Visualization of all alarms and its resetting from the control panel Touch-screen”.
  • Unified greasing in few points.
  • Electronic safety on every reduction to arrest the machine in case of overload, with automatic re setting from the control panel.
  • Automatic Cycle of wasting and complete disinfection of the machine.
  • Safety protection and anti-dust (with pressurization system to protection of the unload some bottles.
  • Speed of the machine controlled by an electronic frequency speed control with remote distance control (inverter) for all the motors installed in the machine.
  • One single collectorized waste water drainage point with inspection cover.
  • Continuous automatic filtration of the detergent bath.
  • Automatic press for collecting labels and recycling the detergent solution.
  • Visualization on the control panel “touch-screen” of all functions, concentration, levels, pressures, temperatures and maintenance time.
  • Remote assistance through Tele-Service System
  • Preparation for the automatic slow and stop the machine in the event of conveyor belt failure or jamming.
  • The machine is in compliance with Machine Directive 2006/42/CE.
  • High speed loving and unloading systems.
  • Visualization of all alarms and its resetting from the control panel Touch-screen”.
  • Unified greasing in few points.
  • Electronic safety on every reduction to arrest the machine in case of overload, with automatic re setting from the control panel.
  • Automatic Cycle of wasting and complete disinfection of the machine.
  • Safety protection and anti-dust (with pressurization system to protection of the unload some bottles.
  • Speed of the machine controlled by an electronic frequency speed control with remote distance control (inverter) for all the motors installed in the machine.
  • One single collectorized waste water drainage point with inspection cover.
  • Continuous automatic filtration of the detergent bath.
  • Automatic press for collecting labels and recycling the detergent solution.
  • Visualization on the control panel “touch-screen” of all functions, concentration, levels, pressures, temperatures and maintenance time.
  • Remote assistance through Tele-Service System
  • Preparation for the automatic slow and stop the machine in the event of conveyor belt failure or jamming.

OPERATION

Click on the relevant machine to view its operation diagram.

Washing cycle and main components

  1. Automatic bottle loading
  2. Bottle depletion
  3. Pre-washing inner spraying by water at 40 °C
  4. Pre-washing inner and outer spraying by water at 40 °C
  5. Pre-washing inner and outer spraying by water at 50 °C
  6. Maceration bath in detergent solution at 70 °C
  7. Inner and outer spraying by detergent with water at 80 °C
  8. Maceration bath in detergent solution at 80 °C
  9. 1st rinsing: inner and outer rinsing by water at 60 °C
  10. 2nd rinsing: inner and outer spraying by water at 60 °C
  11. 3trd rinsing: inner and outer spraying by water at 45 °C
  12. 4th rinsing: inner and outer spraying by water at 30 °C
  13. 5th rinsing: inner and outer spraying by network water at 10 – 15 °C
  14. Depletion of bottom and dripping
  15. Automatic bottle unloading

Washing cycle and main components

  1. Automatic bottle loading
  2. Bottle depletion
  3. Pre-washing inner spraying by water at 40 °C
  4. Pre-washing inner and outer spraying by water at 40 °C
  5. Pre-washing inner and outer spraying by water at 50 °C
  6. Maceration bath in detergent solution at 70 °C
  7. Inner and outer spraying by detergent with water at 80 °C
  8. Maceration bath in detergent solution at 80 °C
  9. Inner and outer spraying by detergent with water at 70 °C
  10. Maceration bath in detergent solution at 70 °C
  11. 1st rinsing: inner and outer rinsing by water at 60 °C
  12. 2nd rinsing: inner and outer spraying by water at 60 °C
  13. 3trd rinsing: inner and outer spraying by water at 45 °C
  14. 4th rinsing: inner and outer spraying by water at 30 °C
  15. 5th rinsing: inner and outer spraying by network water at 10 – 15 °C
  16. Depletion of bottom and dripping
  17. Automatic bottle unloading

Washing cycle and main components

  1. Automatic bottle loading
  2. Bottle depletion
  3. Pre-washing inner spraying by water at 40 °C
  4. Pre-washing inner and outer spraying by water at 40 °C
  5. Pre-washing inner and outer spraying by water at 50 °C
  6. Maceration bath in detergent solution at 70 °C
  7. Inner and outer spraying by detergent with water at 80 °C
  8. Maceration bath in detergent solution at 80 °C
  9. Inner and outer spraying by detergent with water at 80 °C
  10. Maceration bath in detergent solution at 80 °C
  11. Inner and outer spraying by detergent with water at 70 °C
  12. Maceration bath in detergent solution at 70 °C
  13. 1st rinsing: inner and outer rinsing by water at 60 °C
  14. 2nd rinsing: inner and outer spraying by water at 60 °C
  15. 3trd rinsing: inner and outer spraying by water at 45 °C
  16. 4th rinsing: inner and outer spraying by water at 30 °C
  17. 5th rinsing: inner and outer spraying by network water at 10 – 15 °C
  18. Depletion of bottom and dripping
  19. Automatic bottle unloading

construction details

ASCIUGATURA

Macchina con sistema di asciugatura bottiglie. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

ACCESSORIO 2

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

ACCESSORIO 3

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

ACCESSORIO 3

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Akomag logo bianco

Frazione Diolo, 15/D
43019 Soragna (PR), Italy

Phone: (+39) 0524.599097
E-mail: info@akomag.com

News

Privacy Policy
Copyright © 2019 Akomag S.r.l. - VAT number: 02161090341